SLV

Mounting pot for ADI recessed spot.

Mounting pot for the DASAR PREMIUM 180 and GIMBLE OUT luminaires.

The P-LIGHT 27 emergency lighting system is suitable for use as a wall and ceiling light. The safety lights are fitted with a built-in Ni-MH batter...

The P-LIGHT 33 emergency lighting system is suitable for use as a wall and ceiling light. The safety lights are fitted with a built-in Ni-MH batter...

P-LIGHT suitable for use as emergency lighting for wall and ceiling installation. The two rigid lamp heads are each fitted with a 2W LED. The safet...

P-LIGHT Set of 4 additional pictogram foils (left diagonally upwards / left diagonally downwards / right diagonally upwards / right diagonally down...

P-LIGHT Set of 4 additional pictogram foils (left diagonally upwards / left diagonally downwards / right diagonally upwards / right diagonally down...

P-LIGHT pictogram films as a set of 3 with additional signs (left / right / down).

P-LIGHT pictogram films as a set of 2 with additional signs (right diagonally upwards / right diagonally downwards).

Rechargeable battery for the P-LIGHT series Ni-MH 3.6V at 900mA.

Rechargeable battery for the P-LIGHT series Ni-MH 3.6V at 1000mA.

Rechargeable battery set for the P-LIGHT series Ni-Cad 3.6V at1000mA consisting of 2 pces.

Rechargeable battery for the P-LIGHT series Ni-MH 7.2V at 1000mA.

Dimmable and electronic 12V low-voltage transformer with screw terminal for ranges from 10-60W.

Dimmable and electronic 12V low-voltage transformer with screw terminal for ranges from 50 - 150W.

TCI LED driver with 350mA constant current and an output of 15W in especially flat profile, includes strain relief. LED connection must be made wit...

LED driver with 320mA constant current to connect between 1-3 Power LED with 1W. This driver can also be installed inside junction box 229260. LED ...

Dimmable LED driver providing 350mA constant current for 4-6 Power LEDs. Series connection of LEDs required.

Dimmable LED driver with 700mA constant current to connect between 6W and 10.5W max. LED connection must be made with series circuits.

Dimmable LED driver providing 500mA constant current for 9-15 Power LEDs. Series connection of LEDs required.

Dimmable LED driver with output of 14.7W with a constant current of 700mA.

LED driver providing 700mA constant current for 1-3 Power LEDs with 3W output. In addition, it is suitable to put into junction box 229260. Series ...

Dimmable LED driver with 1050mA constant current and an output of 0-40W. Dimmable with reverse phase controller. LED connection must be made with s...

LED power supply providing 24V constant current for wattages 0-100W.