We can source most electrical products. Contact us, we're here to help.
This is the Scolmore MD9014 LED Dimmer Module Leading or trailing edge 100W
The problems of flickering and poor dimming range are well-documented issues for installers when it comes to LED dimmers. Now Scolmore has come up with an intelligent dimmer module that not only eliminates flickering, but is much easier to control than regular dimmers, and is essentially two dimmers in one – offering the installer maximum compatibility.
With a choice of dimming modes – leading or trailing edge – installers can choose the mode that works most effectively with the LED lights they are using. The electronics inside some LED lamps have better compatibility with trailing edge and some are better in leading edge.
Flicker at the bottom end of the dimming range is quite common when dimming LEDs. By incorporating a minimum brightness setting, the new Dual Mode Dimmer Module allows the minimum brightness to be adjusted, so that any flicker at the bottom end of the dimming range can be trimmed out.
Some LED dimmers can also be quite complicated to install, especially when changing the settings such as dimming mode and minimum brightness, sometimes requiring the installer to perform a specific switching sequence using the dimmer knob. Scolmore has made this much easier by positioning two small switches on the back of the module. Switch 1 allows the minimum brightness to be adjusted; switch 2 allows the dimming module to be adjusted. Their position on the back of the module also makes it easier to change the dimmer settings without removing the module from the plate and so saving installation time.
The Dual Mode Dimmer Module also includes electronic thermal overload protection, so that if the module gets too hot it will cut out without damaging the internal electronics, allowing the module to cool down. This means that once it has cooled, it can be used again, with no need to replace the module. With some dimmers, the overload protection will reset the dimmer to factory settings, resulting in the installer having to be called out to reprogram the dimmer. With the Scolmore module, the thermal overload protection does not have any effect on the installation settings, which means that the dimmer will remain set in the ideal compatibility settings for the LED lamps, as originally set by the installer.
The small size of the new dimmer module means they can be placed above/below each other on multi-tier plates. They will fit into 25mm back boxes when used on raised plates and into 35mm back boxes when used on flat plates.
Specification
Dimensions
Standard Delivery 2-5 Days Over FREE (*Excluding items over 600mm in length) Next Day Delivery Available - £12.50 (Order By 2pm For Monday-Friday)
All in stock orders are dispatched on the day they are received if placed before 4pm.
Standard delivery we will use Royal mail, which is usually around 2-5 working days delivery
On a courier delivery, which we will often use for larger items, deliver can be expected between 2 and 5 days from the point of order. If for any reason you order is set to take longer than this, we will contact you to keep you informed.
The website will quote as close to the shipping price as we can, however in some circumstances, with some of the more remote areas of the UK, we will contact you and quote you a price once the order has been received
We can also deliver into Europe and the rest of the world, but price is dependent on weight and dimensions. Price is variable and is given upon checkout. Often we will quote as close to the price as we can, however in some circumstances, with shipping outside of the UK, we will contact you and quote you a price once the order has been received.
For next day delivery (at an additional charge), your order must be placed by 2pm Monday to Friday. Next day delivery does not include weekend delivery, and as such all orders placed next day on a Friday will be delivered the following Monday, or if after 2pm will be delivered on Tuesday
All our products are backed by a no-nonsense guarantee:
If you order the wrong product, please inform us within 14 working days and we will advise you of the correct product and return procedures. Please note if this is the case, then responsibility and cost of returning this item is that of you the customer.
Damages
If the item you ordered is damaged please advise us within the first 48 hours of receiving and we will collect and replace free of charge.
Cut Cable
As we sell cable by the metre, this often comes cut from a 100m reel. for this reason, cut cable is NON-RETURNABLE
Changed your mind?
You can return any part of your order, as long as the goods are as new and in the original packaging
Please do not write on the packaging itself.
How do I return?
Email us at info@sparkswarehouse.com with the order number, which items you need to return and the reason.
You will get a confirmation email with shipping guidelines once your return has been accepted
How soon will I get my refund?
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied, via the original method of payment, within 28 business days.
