Tridonic

Product description Independent dimmable LED driver Emergency lighting LED driver with DALI interface and automatic test function For self-contain...

The EM powerLED BASIC FX 104 LP 80W 200V constant current LED driver for self-contained emergency lighting from the EM powerLED series from TRIDONI...

LED emergency light module for direct installation in ceilingsComplete set with integrated electronics, LED module, cooling surface, optics and bat...

With the ACU SC 30x43x30mm CLIP-ON SR PA SET, Tridonic offers a practical, optional strain relief set for independent applications. With the set, y...

Output current adjustable between 250 - 700 mA with ready2mains™ programmer, I-select 2 plugs or DALI Max. output power 17 W Up to 86% efficiency P...

Two-color LED for status displayWith the optional two-color LED from Tridonic, you can check the status of your control gear: Green means "System O...

FK 75 M20 moisture-proof box 88x88x42

Since DALI-RM is not designed to switch electrical loads. The maximum load that can be connected to the DALI-RM is one contactor coil/power relay c...

Accessories Tridonic LED Connection Cable

This strain relief expands your LED Driver into a fully Class II compatible LED Driver (e.g. for ceiling installation) and can be mounted on the dr...

Accessories TRIDONIC ACL BRIDGE LLE16 PUSH-FIX

The most important product properties of the TRIDONIC ZRM 6-ES/CT at a glance: - Digital superimposed ignitor with timer - Optimum pulse-pause igni...

The separate green LED from TRIDONIC is used to display the charging current flow of the TRIDONIC EM converter. It is 60 mm long. TRIDONIC offers a...

Easy adaptation of suspended luminaires to a sensor solution, just by adding an extra hole Side screwing in combination with rubber grommet gives t...

The most important product properties of the TRIDONIC ZRM U6M A003 at a glance: - The digital power switch ZRM U6M automatically reduces the lighti...

The most important product properties of the TRIDONIC ZRM 2-ES/C at a glance: - Standard superimposed ignitor without internal starter - Switching ...

Resistor TRIDONIC I-SELECT 2 PLUG 275MA BL

Ready-made resistor for 1000mA and 5.00 kO for setting the current of TRIDONIC LED control gear

Dimming range 1 to 100% Protection class IP20 5-year guarantee Flat metal housing with white cover Suitable for escape route lighting systems accor...

Ready-made resistor for 1050mA and 4.75 kOhm for setting the current of TRIDONIC LED control gear

Ready-made resistor for current setting Compatible with LED drivers with I-select 2 interface; Not compatible with I-SELECT (Generation 1)Resistor ...

Professional built-in overvoltage protection from TRIDONIC with visual status display and secured terminal output for interrupting the power supply...

Test switch for connecting to the emergency lighting unit and for checking the device function.

The optional switch EM 2 test switch is used to check the function of the TRIDONIC EM emergency lighting control gear. It can be connected directly...