Tridonic

For easy connection of TRIDONIC LLE-FLEX LED tapes to each other (LED tape and LED tape). Installation is extremely easy: Remove the adhesive tape ...

The basicDIM Mounting Ring (item no. 28001025) with a sheet metal thickness of 0.8 – 1.2 mm. Serves to be fixed to the luminaire housing by means o...

Accessories TRIDONIC ACL BRIDGE LLE16 PUSH-FIX

Accessories TRIDONIC ACL CLIP 4.3mm PUSH-FIX

Ready-made resistor for current setting Compatible with LED drivers with I-select 2 interface; Not compatible with I-SELECT (Generation 1)Resistor ...

Dimming range 1 to 100% Protection class IP20 5-year guarantee Flat metal housing with white cover Suitable for escape route lighting systems accor...

Resistor TRIDONIC I-SELECT 2 PLUG 275MA BL

Ready-made resistor for 1000mA and 5.00 kO for setting the current of TRIDONIC LED control gear

Ready-made resistor for 1050mA and 4.75 kOhm for setting the current of TRIDONIC LED control gear

Strain-relief set 43x30mm Optional strain-relief set for independent applications Transforms the LED driver into a fully class II compatible LED d...

The mounting frame is suitable for all sensors of the 5DP 14f series for direct mounting in the luminaire housing. A supplied shutter can optionall...

Mounting frame for Tridonic sensors 5DP 14fThe mounting frame is suitable for all Tridonic sensors 5DP 14f. It is used for direct attachment in the...

The TRIDONIC LLE FLEX LED modules can be easily installed using the practical plug connector. It has the dimensions 2000 x 9 x 5.7 mm.

This strain relief expands your LED Driver into a fully Class II compatible LED Driver (e.g. for ceiling installation) and can be mounted on the dr...

The ready-made resistor ADV Plug Type A BR for current setting from Tridonic is compatible with all Tridonic LED drivers of the LC flexC ADV series...

The ready-made resistor ADV Plug Type B YL for current setting with 3.16 kiloohms from Tridonic is compatible with all Tridonic LED drivers of the ...

The ready-made resistor ADV Plug Type C YL for current setting with 28.70 kiloohms from Tridonic is compatible with all Tridonic LED drivers of the...

The ready-made resistor ADV Plug Type E YL for current setting with 100 ohms from Tridonic is compatible with all Tridonic LED drivers of the LC fl...

The ready-made resistor ADV Plug Type F YL for current setting with 30 ohms from Tridonic is compatible with all Tridonic LED drivers of the LC fle...

Steel cable system for suspended mounting. Suspension height up to max. 1.2 m.

Product description NEW: lumDATA (DALI-2 part 251, 252 and 253) Can be used as a luminaire installation or as an independent module with snap-on st...

Tridonic 350mA I-SELECT 2 PLUG Blue from Tridonic Model: 28001110 This Tridonic resistor is a ready-to-use body used to set the output current valu...

With the optional accessory clip, you can mount the TRIDONIC SMART sensors on the lamp. The sensor is then optimally protected against indirect lig...

The most important product properties of the TRIDONIC PC 1x14 T5 TEC lp at a glance: - CELMA energy efficiency class A2 - Nominal service life up t...