This is a TCI 55w 1050mA MaxiJolly Dali dimmable constant current LED driver. The full features list is as follows:
•Multipower driver supplied with dip-switch for the selection of the output current. •IP20 independent driver, for indoor use (DC MAXI JOLLY HC/2 DALI). •Class I protection against electric shock for direct or indirect contact (DC MAXI JOLLY HC/2 DALI). •Driver for built-in use (DC MAXI JOLLY HC DALI BI). •It can be used for lighting equipment in protection class I. •Active Power Factor Corrector. •Analogical input (NTC) for thermal sensor connection. •Auxiliary output 12 V max. 100 mA. •Current regulation ±5 % including temperature variations. •Input and output terminal blocks on the same side (wire cross-section up to 1,5 - 2,5 mm2 / AWG15 - AWG13). •Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (DC MAXI JOLLY HC/2 DALI). •Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. •Thermal protection = C.5.a.
Operation mode:
Operation Mode •Light regulation 0/0,5 - 100 % by means of PUSH function, 0/1...10 V interface (I=1 mA) or 100 Kohm potentiometer and DALI. •Features DALI dimming: - memory function for sets or light groups; - recall of stored functions; - compatible with standard DALI interfaces. •Light regulation 0/0,5 - 100 % by means of PUSH function (mains voltage): - a short push to turn on and off; - a longer push to increase or decrease light intensity; - regulation automatically stops at minimum and maximum values; - for another on, regulation or off command, release the push button and give the desired command again. - dimming level memory at mains restore. •Possibility to use PUSH function to 4/5 drivers without sync cable. •Maximum length of the cable, from push button to last driver, must be max. 15 m / 49 ft. In case of applications where the cable is longer than 15 m / 49 ft, keep this separate from the 110 - 240 Volt mains cable. •ATTENTION: only use normally open push buttons with no incorporated warning light. •Specific dimming terminal connection with a 0/1...10 Vdc electronic potentiometer (0/1…10 V local dimming, double insulation required for external connection). •Max. 10 synchronised drivers of which only one can be controlled (1 Master + 9 Slaves). •Synchronization cable is separately supplied.
Specification
Dimensions
Standard Delivery 2-5 Working Days - £3.95 on orders under £35, FREE on orders of £35 or more (excluding fluorescent and LED tubes). Fluorescent and LED tubes (any length) - £8.95. Orders containing both tubes and other items may incur a separate standard delivery charge for the other items. Next Day Delivery Available - £12.50 (Order By 2pm For Monday-Friday)
All in stock orders are dispatched on the day they are received if placed before 4pm.
Standard delivery we will use Royal mail, which is usually around 2-5 working days delivery
On a courier delivery, which we will often use for larger items, deliver can be expected between 2 and 5 days from the point of order. If for any reason you order is set to take longer than this, we will contact you to keep you informed.
The website will quote as close to the shipping price as we can, however in some circumstances, with some of the more remote areas of the UK, we will contact you and quote you a price once the order has been received
We can also deliver into Europe and the rest of the world, but price is dependent on weight and dimensions. Price is variable and is given upon checkout. Often we will quote as close to the price as we can, however in some circumstances, with shipping outside of the UK, we will contact you and quote you a price once the order has been received.
For next day delivery (at an additional charge), your order must be placed by 2pm Monday to Friday. Next day delivery does not include weekend delivery, and as such all orders placed next day on a Friday will be delivered the following Monday, or if after 2pm will be delivered on Tuesday
All our products are backed by a no-nonsense guarantee:
If you order the wrong product, please inform us within 14 working days and we will advise you of the correct product and return procedures. Please note if this is the case, then responsibility and cost of returning this item is that of you the customer.
Damages
If the item you ordered is damaged please advise us within the first 48 hours of receiving and we will collect and replace free of charge.
Cut Cable
As we sell cable by the metre, this often comes cut from a 100m reel. for this reason, cut cable is NON-RETURNABLE
Changed your mind?
You can return any part of your order, as long as the goods are as new and in the original packaging
Please do not write on the packaging itself.
How do I return?
Email us at info@sparkswarehouse.com with the order number, which items you need to return and the reason.
You will get a confirmation email with shipping guidelines once your return has been accepted
How soon will I get my refund?
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied, via the original method of payment, within 28 business days.
