All

Pygmy 240v 2w LED E14 Pygmy 2700K - 15000 Hours Life - BELL 05663

12v 1.7W G4 Capsule LED High Power 2700k - Osram - 4052899964358

Osram 240v 2.6w (= to 35w) LED GU10 230 Lumens Warmwhite (2700k) 36? Non Dimmable - 4052899958050

Osram 240v 2.6w (= to 35w) LED GU10 230 Lumens Warmwhite (3000k) 36? - 4058075815414

240v?3.3w LED GU10 3000?K 36? Non Dimmable - Osram - 4058075132177

With the optional accessory clip, you can mount the TRIDONIC SMART sensors on the lamp. The sensor is then optimally protected against indirect lig...

Mounting frame for Tridonic sensors 5DP 14fThe mounting frame is suitable for all Tridonic sensors 5DP 14f. It is used for direct attachment in the...

With the ACU SC 30x43x30mm CLIP-ON SR PA SET, Tridonic offers a practical, optional strain relief set for independent applications. With the set, y...

Two-color LED for status displayWith the optional two-color LED from Tridonic, you can check the status of your control gear: Green means "System O...

FK 75 M20 moisture-proof box 88x88x42

Accessories Tridonic LED Connection Cable

This strain relief expands your LED Driver into a fully Class II compatible LED Driver (e.g. for ceiling installation) and can be mounted on the dr...

Accessories TRIDONIC ACL BRIDGE LLE16 PUSH-FIX

The separate green LED from TRIDONIC is used to display the charging current flow of the TRIDONIC EM converter. It is 60 mm long. TRIDONIC offers a...

Resistor TRIDONIC I-SELECT 2 PLUG 275MA BL

Ready-made resistor for 1000mA and 5.00 kO for setting the current of TRIDONIC LED control gear

Dimming range 1 to 100% Protection class IP20 5-year guarantee Flat metal housing with white cover Suitable for escape route lighting systems accor...

Ready-made resistor for 1050mA and 4.75 kOhm for setting the current of TRIDONIC LED control gear

Ready-made resistor for current setting Compatible with LED drivers with I-select 2 interface; Not compatible with I-SELECT (Generation 1)Resistor ...

Test switch for connecting to the emergency lighting unit and for checking the device function.

The optional switch EM 2 test switch is used to check the function of the TRIDONIC EM emergency lighting control gear. It can be connected directly...