Philips

2x49w Tube Performer Ballast - HFP242TL5 - HFP249TL5HO

Philips Electronic 14/35w TL5 Ballast

Philips Electronic Ballast 240v -50/60/0hz to run 2 x 58 T8 tubes If ordered you will be supplied with the Performance variant HFP258TLD

90w SOX Ballast BSX90L32 LX90CI LX90H RSL090245 SZ090K245

250w MBFU Ballast BHL250L32 - G53399.T - HMZ250245 - LG250H - OMB250A102K

Product Features Flat, lightweight high-frequency electronic regulating ballast, using 1-10V protocol for TL5 fluorescent lamps  Features Programm...

Part Number SOX180-PH Category Discharge Lamps Type SOX Bulbs Cap [?] B22d/BC Volts This item is run by control gear in the fitting W...

The Philips HID-PV Cx2x70 370/S CDM electronic ballast runs 2x70w metal halide lamps.this ballast is for use in luminaire, minimal lamp power sprea...

The Philips HID-PV m 1x020/S minature ballast runs 1x20w metal halide lamps.this ballast is for use in luminaire,smallest gear available, minimal l...

This item is obsolete it has been replaced with the HFR258 which is what you will be sent   https://www.easy-controlgear.com/products/philips-hfr25...

This Ballast allows the lamp power can be regulated from 100 to 1%. It has low energy consumption in standby 0.35W. It Gives you up to 75% reductio...

This Philips HF-R TD 2 14-35 T5 dimmable ballast runs 2 x 14w - 35w T5 fluorescent tubes. This ballast's lamp power can be regulated from 1% to 100...

This Philips HF-R 218 TL-D dimmable ballast runs a 2 x 18w T8 fluorescent tubes. This ballast's lamp power can be regulated from 1% to 100%, automa...

The Philips HF-M Blue 121 LH TL5 is a linear non-dimmable, high frequency ballast to run:1 x 21 T5. This ballast has flicker free start,Multi lamp ...

The Philips HF-M RED 124 SH TL/TL5/PL-L is a square non-dimmable, high frequency ballast to run:1 x 15 watt or 18 watt T8 1 x 18 watt or 24 watt si...

The Philips HF-P 1 95-120 TL5 is a fixed output high frequenct ballast for use with 1 x 95w or 120w flourescent lamps. This ballast has a flicker f...

The Philips HF-B 258 TL-D high frequency fixed output ballast is for use with 1 or 2 x 58w T8 flourescent tube. This Philips unit is for use in Dep...

The Philips BSN 400 L33-A2-TS is a 240v wire wound ballast to run 1 x 400w SON or Metal Halide lamp. These ballasts should be used with a Philips S...

This is a Philips SN 58 semi-parallel ignitor for HPA/SON lamps.

This is the alternative which will be sent  : https://www.easy-controlgear.com/products/ecxd1050-299-sr-186763-vossloh-schwabe?_pos=1&_sid=b84b...

Specifications General Information Remarks UK importer address: Signify Commercial UK Limited, 3, Guildford Business Park, GU2 8XG Appli...

Please note Philips no longer make these you will be supplied with a quality alternative.  General Information SKU 120080 Manufacturer N...

Specifications Operating and Electrical Output Current (Max) 1050 mA Output Current (Min) 300 mA Output Voltage (Max) 54 V ...