Philips

The Philips BSL 11 K202-A2-TS is a 100w 230v 50hz ballast to run 1 x 100w SDW-T lamp. These ballasts should be used with a Philips CSLS 100 and a 1...

The Philips BSN 100 K302-A2-ITS is a 240v wire wound ballast to run 1 x 100w SON or Metal Halide lamp.

The Philips BSN 150 K302-A2-ITS is a 240v wire wound ballast to run 1 x 150w SON or Metal Halide lamp.

This is a Philips EXC55 ballast to run 1 x 55w SOX lamp. Its full specifications can be found here: SPEC SHEETSee related products below for the 55...

This is a Philips SI 51 Parallel ignitor for HPI lamps.

This is a Philips SI 52 parallel ignitor for HPI lamps.

This is a Philips SI 54 parallel 400v ignitor for HPI lamps.

This is a Philips SKD 578 semi-parallel ignitor for use with 50-600w SON lamps or 35-250w metal halide lamps.

This is a Philips SN 58S semi-parallel ignitor for HPA/SON lamps.

This is a Philips SN 59 semi-parallel ignitor for MHN/SON lamps.

This is a Philips SND 57 superimposed pulse, digitally controlled ignitor for CDO/SON lamps.

This is a Philips SND 57S superimposed pulse, digitally controlled ignitor for CDO/SON lamps.

This is a Philips SND 58 superimposed pulse, digitally controlled ignitor for CDO/SON/CDM/HPIT lamps.

This is a Philips SND 58S superimposed pulse, digitally controlled ignitor for CDO/SON/CDM/HPIT lamps.

This is a Philips SX 74 parallel ignitor for SOX lamps.

This is a Philips SX 76 parallel ignitor for SOX lamps.

This is the alternative which will be sent  : https://www.easy-controlgear.com/products/ecxd1050-299-sr-186763-vossloh-schwabe?_pos=1&_sid=b84b...

This is a Philips 50w 0.7-1.5a 48v LED driver. Specifications Operating and Electrical Output Current (Max) 1500 mA Output Current (Min)...

Philips Xitanium 50w 0.7-1.5a 54v 230v LED Panel Driver - This is part of the latest Xitanium Range from Philips. It can be used for various downli...