tridonic

We have summarized the most important features of the EVG-LED Tridonic LCA 100W 24V one4all lp PRE for you here: You can use the EVG-LED Tridonic L...

The mounting frame is suitable for all sensors of the 5DP 14f series for direct mounting in the luminaire housing. A supplied shutter can optionall...

Easy adaptation of suspended luminaires to a sensor solution, just by adding an extra hole Side screwing in combination with rubber grommet gives t...

The LCA 100W 1100-2100mA one4all CR PRE from Tridonic's PREMIUM series is an efficient dimmable constant current LED driver for luminaire installat...

The LCA 100W 1100-2100mA one4all SR PRE from Tridonic's PREMIUM series is an efficient dimmable constant current LED driver for luminaire installat...

The emergency power-capable dimmable electronic ballast for LED modules LC 100W 1100-2100mA flexC C EXC from the EXCITE series from Tridonic is per...

100W LED ECG for built-in/independent mountingThe constant current LED driver LC 100W 1100-2100mA flexC SR EXC from the Excite series from Tridonic...

Mounting frame for Tridonic sensors 5DP 14fThe mounting frame is suitable for all Tridonic sensors 5DP 14f. It is used for direct attachment in the...

The TRIDONIC LLE FLEX LED modules can be easily installed using the practical plug connector. It has the dimensions 2000 x 9 x 5.7 mm.

The ECG-LED LCA 35W 24V one4all SC PRE from Tridonic is typically used in cove lighting, facade lighting, accent lighting and in indirect ceiling l...

Sensor for light measurement / motion detection The small, controllable basicDIM DGC infrared sensor from TRIDONIC is used for ON/OFF light measure...

This strain relief expands your LED Driver into a fully Class II compatible LED Driver (e.g. for ceiling installation) and can be mounted on the dr...

DALI XC is a device with four inputs for controlling lighting with single buttons, double buttons and switches that can be combined depending on th...

The ready-made resistor ADV Plug Type A BR for current setting from Tridonic is compatible with all Tridonic LED drivers of the LC flexC ADV series...

The ready-made resistor ADV Plug Type B YL for current setting with 3.16 kiloohms from Tridonic is compatible with all Tridonic LED drivers of the ...

The ready-made resistor ADV Plug Type C YL for current setting with 28.70 kiloohms from Tridonic is compatible with all Tridonic LED drivers of the...

The ready-made resistor ADV Plug Type D YL for current setting with 54.90 kiloohms from Tridonic is compatible with all Tridonic LED drivers of the...

With the LC 75W 100-400mA 1-10V lp EXC from its EXCITE series, Tridonic offers a dimmable 1-10V non-SELV constant current driver for luminaire inst...

Constant current LED driver for luminaire installation. For luminaires of protection class I and protection class II Output current adjustable betw...

The Tridonic LLE FLEX G2 8x4800 4W-600lm/m 827 ADV 24V SELV constant voltage LED strip (4.8m roll) is dimmable and ideal for decorative lighting ap...

Sensor mounting frame with "click in" technologyThe ACU Sensor Housing 14rs mounting frame from Tridonic enables the wired sensors of the "MSensor ...

Sensor mounting frame with "click in" technologyThe sensor housing ACU 032 IP66 WH mounting frame from Tridonic enables the wired sensors of the "M...

Sensor mounting frame with "click in" technologyThe ACU sensor housing 031 IP20 WH mounting frame from Tridonic enables the wired sensors of the "M...

The Tridonic LLE FLEX G2 8x4800 4W-600lm/m 830 ADV 24V SELV constant voltage LED strip (4.8m roll) is dimmable and ideal for decorative lighting ap...