Designed for High Lux Level Applications, Typically 10.8 Lux
The LR3 is specially designed for use where a high lux level is required, mainly to comply with the US one-foot candle levels. The reflector and optic design maximises performance whilst complying with 10.8 lux requirements.
The lamphead includes a bi-colour LED charge indicator, 500mm wiring loom and recessed mounting brackets. The XYLUX LR3 continues the XYLUX new generation of LED Emergency luminaires designed to be effective and unobtrusive. The LED driver and battery pack are located in an articulated plastic housing, connected via a 500mm wiring loom to the lamp head assembly making on-site installation easy.
The LED lamp head, which contains both the high power white LED and indicator LED, has been designed to be recessed into a 42-44mm cut out.
Related Downloads
Specifications
Supply voltage230 V
Supply frequency50/60 Hz
Supply current (max)53 mA
Power factor0.45
Total circuit power (max)4.0 W
Total circuit power (nominal)3.4 W
Battery charge current200 mA
Ambient temperature (ta)0°C to +35°C
Protection classClass II
Conductor size0.5 to 1.5mm²
Emergency duration3 hours
Recharge period24 hours
Weight of control gear431 g
Lumen output550 lm
IP ratingIP30
CCT5700 K
Weight of lamphead70 g
Features
SmartCharge™
SmartCharge™ applies an intermittent charging duty cycle designed for use with NiMH batteries. This provides energy efficient charging maintenance, reduced operating temperatures and optimum service life of NiMH batteries.
Technology Options
Standard
For applications where self-testing is not required or suitable, the non-AutoTest® option provides the same quality and performance expected of Mackwell products, without the AutoTest® feature.
DALI AutoTest®
Provides benefits by enabling testing and monitoring of an emergency lighting system either on-site or via an internet connection. DALI AutoTest® is ideal for monitoring larger buildings and multiple sites. The product defaults to standalone AutoTest when not connected to a DALI network.
Central Battery
Suitable for central battery applications that use a nominal AC or DC supply of 110V to 240V that includes a hold-off input to inhibit the LED driver output when a mains supply is connected.
Relevant Standards
- EN 60598-2-22
- EN 61347-2-7
- EN 61347-2-13
- BS 5266-1
- EN 62034
- EN 62386
- EN 62031
- EN 62471
Batteries
The luminaire includes a rechargeable 4.8V 4Ah NiMH battery pack for 3 hours operation.
